Charging System Indicator; Supplemental Restraint System (Srs); Lane Keeping Assist System (Lkas); Malfunction Indication Lamp (Check Engine Light) - Honda Civic 2020 Owner's Manual

Hatchback
Hide thumbs Also See for Civic 2020:
Table of Contents

Advertisement

INSTRUMENT PANEL

Charging System Indicator

Comes on when the battery is not charging.
• Comes on when you turn the ENGINE START/STOP button
*1
ignition switch
to ON and goes off when the engine starts or
after several seconds if the engine did not start. If "readiness
codes" have not been set, it blinks five times before it goes off.
• Comes on if there is a problem with the emissions control system.
• Blinks when a misfire in the engine's cylinders is detected.
• Comes on while driving - Have your vehicle checked by a dealer.
• Blinks while driving - Stop in a safe place where there are no
flammable objects. Stop the engine for 10 minutes or more, and
wait for it to cool down. Then, take your vehicle to a dealer.

Supplemental Restraint System (SRS)

Comes on if a problem with any of the following is detected:
• Supplemental restraint system
• Side airbag system
• Side curtain airbag system
• Seat belt tensioner
Stays on constantly or does not come on at all - Have your vehicle
checked by a dealer.

Lane Keeping Assist System (LKAS)

There is a problem with the system.
• Stays on constantly or does not come on at all - Have your vehicle
checked by a dealer.
28 |
*1
/
*1 - If equipped

Malfunction Indication Lamp (check engine light)

1.5 L engine models:
• Comes on when you turn the ENGINE START/STOP button
*1
ignition switch
to ON, and goes off when the engine starts, or
after several seconds if the engine did not start. If "readiness
codes" have not been set, it blinks five times before it goes off.
2.0 L engine models:
• Comes on when you turn the power mode ON, and goes off when
the engine starts If "readiness codes" have not been set, it blinks
five times before it goes off.
• Comes on if there is a problem with the emissions control system.
• Blinks when a misfire in the engine's cylinders is detected.
• Readiness codes are part of the on board diagnostics for the
emissions control systems.
• Comes on while driving - Have your vehicle checked by a dealer.
• Blinks while driving - Stop in a safe place where there are no
flammable objects. Stop the engine for 10 minutes or more, and
wait for it to cool down. Then, take your vehicle to a dealer.
Anti-lock Brake System (ABS)
If it comes on at any other time, there is a problem with the ABS.
• Stays on constantly - Have your vehicle checked by a dealer. With
this indicator on, your vehicle still has normal braking ability but
no anti-lock function.
INSTRUMENT PANEL
*1
/
*1 - If equipped
| 29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents