Fujitsu ETERNUS LT140 User Manual page 43

Chapter 4 Setting Backup Software
4.5 NetVault
4
5
6
7
8
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Server Connection-
Specify the Generic Cleaning items as follows:
• Issue a load command to start cleaning cycle: OFF (the default setting is "ON")
• Use Generic Cleaning: ON (the default setting is "OFF")
The following shows an example configuration in which "Issue a load command to start cleaning
cycle" is set to "OFF" and "Use Generic Cleaning" is set to "ON".
Enter "b" and then press the [Enter] key.
The Device Configuration screen appears again.
Enter "2" and then press the [Enter] key.
"2) Configuration..." is selected. The Configuration screen appears.
Confirm that the item described below is set to "ON".
Change to "ON" if this item is currently set to "OFF".
• Cleaning Tapes Supported
Enter "b" and then press the [Enter] key.
Return to the Drive Configuration screen.
Copyright 2019 FUJITSU LIMITED
43
P3AG-3752-03ENZ0