Windows - Fujitsu ETERNUS LT140 User Manual

Chapter 1 Overview
1.2 References for Setup
Refer
1.2.3

Windows

1.2.3.1 SAS Connection for Windows
The following procedure explains how to connect the LT140 to a Windows server with a SAS connection.
Workflow
Refer
Refer
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Server Connection-
Setting Backup Software
Apply patches, make settings for the robot driver, and set up the backup software.
•
Backup software used
-
NetBackup
•
"4.1 NetBackup" (page 34)
-
NetWorker
•
"4.2 NetWorker" (page 37)
-
IBM Spectrum Protect (IBM Tivoli Storage Manager)
•
"4.3 IBM Spectrum Protect" (page 38)
-
NetVault
•
"4.5 NetVault" (page 40)
Making a Check before Starting the Procedure
Check the environment (operating system, backup software, and HBAs) of the server to be
connected to the LT140.
-
"1.1 Operating Environment" (page 8)
Setting the LT140
Perform the settings for the LT140.
-
"2.1 Settings for SAS Connections" (page 22)
Copyright 2019 FUJITSU LIMITED
17
P3AG-3752-03ENZ0