Different Play Modes: Shuffle And Repeat; Programming Audio Files - Philips DC910/37B User Manual

Different play modes: SHUFFLE and
REPEAT
You can select and change the various play
modes before or during playback. The REPEAT
modes can also be combined with
PROGRAMME.
SHUF ................ all the audio files are played in
random order
REP ALL ........... repeats all the audio files/
programme
REP ................... plays the current audio file
continuously
1
To select your play mode, press SHUFFLE/
REPEAT on the remote control before or
during playback until the display shows the
desired function.
2
Press 2; to start playback if in the STOP
position.
3
To return to normal playback, press SHUFFLE
/ REPEAT on the remote control until the
various SHUFFLE/ REPEAT modes are no longer
displayed.
Note:
– The SHUFFLE and REPEAT functions cannot be
used simultaneously.

Programming audio files

You may store up to 40 audio files in the desired
sequence. If you like, store any track more than
once.
1
Press and hold PROG on the remote control to
store.
➜ flashes, and PR 01 is displayed.
PROG
2
Press S/T to select your desired track
number.
●
For MP3/WMA, you may press PRESET +/- on
the system (or ALBUM/PRESET 3 / 4 on
the remote control) to select a desired album,
then select your desired track.
3
Repeat steps 1-2 to select and store all desired
tracks.
➜ PROGRAM FULL is displayed if you attempt
to programme more than 40 tracks.
4
To start playback of your programme, press 2;.
5
To stop playback, press and hold PROG.
To review the programme
●
Press and hold PROG to stop playback, then
press S/T.
To delete the programme
●
Press and hold PROG once in the STOP mode;
●
Press PROG twice during playback.
➜
disappears from the display.
PROG
Note:
– For compatibility reasons, the album/track
information may differ from what it is displayed
through flash players' music management software.
USB/Card
17