Usb Playback Functions; Different Play Modes: Shuffle And Repeat; Programming Track Numbers; Reviewing Programmed Tracks - Philips DC570 User Manual

USB playback functions

POWER
USB
SHUFFLE
REPEAT
ALBUM/
PRESET
SLEEP
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The REPEAT
modes can also be combined with PROGRAM.
1
To select your play mode, press REPEAT/
SHUFF before or during playback until the
display shows the desired function.
➜
If onE appears the current track will play
repeatedly.
➜
If ALb appears the current album will play
repeatedly.
➜
If ALL appears all tracks will be played
repeatedly.
➜
SHUFF appears if shuffle playback is
activated and disappears if deactivated.
2
To return to normal playback, press the
REPEAT/SHUFF until oFF displayed.
Note:
– The Repeat and Shuffle functions cannot be
combined.
16
TUNER
TUNING +
TUNING
MENU AUX
TIMER PROG
SET TIME
DSC
VOL
DBB
MUTE

Programming track numbers

Program in the STOP position to select and
store up to 20 tracks in the memory.
1
Press PROG/SET TIME on the remote
control to enter the programming mode.
➜
Pr 01 appears and PROG flashes.
2
Press / to select your desired track
S T
number.
●
For tracks in a different album, press ALBUM/
PRESET 3/4 to select a desired album
number.
3
Press PROG/SET TIME to confirm the track
number to be stored.
4
Repeat steps 2-3 to select and store all desired
tracks.
➜ FULL appears if you attempt to program
more than 20 tracks.
5
To start playback of your program, press ÉÅ.

Reviewing programmed tracks

You can review or change the programmed
tracks.
1
Press PROG/SET TIME repeatedly to review
each programmed track.

Changing programmed tracks

1
Press PROG/SET TIME repeatedly to your
desired programmed track.
2
Press / to select your desired track
S T
number.
●
For tracks in a different album, press ALBUM/
PRESET 3/4 to select a desired album
number.
3
Press PROG/SET TIME to confirm the track
number to be stored.
Erasing programmed tracks
1
To erase your program, press and hold PROG/
SET TIME for more than 2 seconds.
➜ CLR appears.