Wds With Ap Mode - D-Link NUCLIAS CONNECT DAP-2680 User Manual

Web User Interface
Wireless Band Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
Mode Click the drop-down menu to select WDS with
AP.
Network Name (SSID) Enter the name of Service Set Identifier (SSID)
up to 32 characters and is case-sensitive.
Auto Channel Selection
This option is unavailable in WDS with AP mode.
Channel Click the drop-down menu to select the desired
channel. The function is only available when
Auto Channel Selection is set to Disable.
Note: The wireless adapters will automatically
scan and match the wireless settings.
Channel Width Click the drop-down menu to select 20 MHz,
Auto 20/40 MHz or Auto 20/40/80 MHz.
Select 20 MHz if you are not using any 802.11n
wireless clients. Auto 20/40 MHz allows you
to connect to both 802.11n and 802.11b/g or
802.11a wireless devices on your network.
AP MAC Address Enter the MAC addresses of the root AP of this
WDS network. If left empty, then this device is
the the root AP.
Site Survey Click Scan to search for available wireless
networks, then click on the available network
that you want to connect with.
D-Link DAP-2680 User Manual

WDS with AP Mode

14