Accessing The Sim Card; Statement - Cisco 800M Series Installing Manual

Chapter 2 Installing the Router
Figure 2-8
Step 3 Insert the 3G module or serial port module using the captive screws such that the Cisco logo of the
module is facing the user as shown in
Figure 2-9
1

Accessing the SIM Card

This section describes how to install and replace the SIM card.
Do not touch any part of the exposed PCB circuit area when the SIM cover is removed.
Caution
Hot surface. Statement 1079
Warning
Warning Make sure that the router is powered off before inserting or removing SIM card from 3G Module.
To access the SIM card in the Cisco 800M Series ISR, follow these steps:
Removing the blank covers
Inserting the Modules
1 2
Module Slot 1
Figure 2-9.
2
Module Slot 0
Cisco 800M Series Integrated Services Router Hardware Installation Guide
2-9