Audio Setup - Philips HTS6520/98 User Manual

Audio setup

Ambisound Setup
HDMI Audio
Night Mode
1
Press SETUP .
» [General Setup] menu is displayed.
2
Press to select [Audio Setup] , then
press .
3
Select an option, then press OK .
4
Select a setting, then press OK .
• To return to the previous menu,
press BACK .
• To exit the menu, press
Note
•
See the explanations of the above options in
the following pages.
[Ambisound Setup]
Optimizes the Ambisound based on this
Home Theater System setup in the room (see
'Getting Started' > 'Start Ambisound setup').
Option Description
[Room Selects the type of walls that
Acoustics] surround the room.
[Room Selects the placement in the
Placement] room.
[Speaker Selects the distance between
Distance] speakers.
[Listening Selects the distance between
Position] the listening postion and this
Home Theater System.
38 EN
[HDMI Audio]
Selects the HDMI audio setting when you
connect this Home Theater System and the
TV with a HDMI cable.
•
•
[Night Mode]
Makes loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
•
•
SETUP .
•
[On] – Allows audio output through the
TV and the speaker system. If the audio
format on the disc is not supported, it
will be downmixed to two-channel sound
(linear-PCM).
[Off] – Disables audio output from the
TV. The sound is only output through the
speaker system.
[On] – Enjoys quiet viewing at night.
[Off] – Enjoys surround sound with a full
dynamic range.
Note
Applicable only to Dolby Digital encoded discs.