7 Adjust settings
You can customize various kinds of settings as
you prefer. Refer to the following instructions to
navigate through the setup menus.
Symbol
Note
•
If the setup option is grayed out, it means the
setting cannot be changed at the current state.
General setup
EasyLink Setup
Disc Lock
Display Dim
OSD Language
Screen Saver
Sleep Timer
Low Power Standby
DivX(R) VOD Code
1
Press
SETUP .
» [General Setup] menu is displayed.
2
Press .
36
EN
Options
[General Setup]
[Audio Setup]
[Video Setup]
[Preferences]
3
Select an option, then press OK .
4
Select a setting, then press OK .
•
To return to the previous menu,
press
BACK .
•
To exit the menu, press
Note
•
See the explanations of the above options in
the following pages.
[EasyLink Setup]
If this Home Theater System is connected
to HDMI CEC compliant TV/devices, all
connected devices can respond to the
following commands simultaneously:
Option
Description
[EasyLink] Turns off or on all EasyLink
features.
To disable this feature, select [Off] .
[One
When you press PLAY , the
Touch
TV and Home Theater System
Play]
are turned on. Disc play starts
if there is a disc in the Home
Theater System.
To disable this feature, select [Off] .
[One
When you press and hold
Touch
STANDBY for at least 3 seconds,
Standby]
the Home Theater System and all
the HDMI CEC devices switch to
standby simultaneously.
To disable this feature, select [Off] .
[System
When you play audio that is routed
Audio
from the connected devices, this
Control]
Home Theater System switches
to the corresponding audio source
automatically.
To enable this feature, select
[On] . Then proceed to [Audio
Input Mapping] to scan and map
all the connected devices.
SETUP .