Table of Contents
Advertisement
RED/BLUE CONVERGENCE
C
onvergence is the correct lin-
ing up of the red and blue
light paths on the TV screen.
NOTE: If no color fringing (see
Smart Help) shows, then no
Convergence adjustments are nec-
essary for your TV.
BEGIN
Select CONVERGENCE con-
1
trol.
With PICTURE MENU (2 of 2) on
screen, move the RED highlight
with the MENU
buttons. Then
press the MENU button.
2
If there is RED or BLUE color
fringing on the White cross, press
the MENU button to continue.
3
Press the MENU
to move the red or blue cross
directly over the white cross on the
TV screen.
The red or blue cross is properly
adjusted when it is completely
merged with the white cross. (No
color appears around the edge of
the white cross).
4
Press the STATUS button to
clear the screen when convergence
adjustments are complete.
STOP
S
H
MART
ELP
Remember. Convergence
has been set at the factory for
best viewing, but if one or more of
the (red or blue) colors appear
around the edges of objects (color
fringing) follow the steps given in
this section.
P
M
ICTURE
ENU
PICTURE
FEATURES
1ST TIME SETUP
4
VOL
-
1
2
1
4
3
7
8
buttons
0
NOTE: Adjustments for "Multi-Point" on-
screen color fringing can also be made as part
of the TV's Convergence control system.
Follow the TV's on-screen menu directions to
select individual screen areas that can be read-
justed and set for varying red/blue color fring-
ing conditions. These multi-point settings can
then be "Saved" to memory for the specific
areas of the TV screen (or Factory Settings for
convergence can be recalled and put back into
place for use).
C
(
ONTROLS
MAIN MENU
SOUND
HELP
EXIT
1 2
CH
VOL
+
CH
3
5
6
9
SLEEP
8
)
CONTINUED
PICTURE MENU
COLOR
BRIGHT
SHARP
EXIT
PICTURE MENU
CONVERGENCE
FLESH CORRECTION
EXIT
If there is RED or BLUE
fringe on the WHITE cross,
use this adjustment to
improve the picture.
2
Press "M" to Continue
- or -
Press " " to Return
3
Use the
keys to merge the
RED fringe into the WHITE
cross. Press "M" to Continue.
MULTI-POINT CONVERGENCE
Use the
keys to adjust
Press "M" to Save
Press " " to Undo
Press "M" to Adjust or
Press "STATUS" to Continue
Press " " to
recall Factory Settings
TINT
PICTURE
CLEARVIEW
MORE...
1 OF 2
MORE...
2 OF 2
Advertisement
Table of Contents
