Table of Contents
Advertisement
Set/Change code
The Child lock feature (see TV, Features, p. 15)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels, a 4-digit code must be
entered.The Set/Change code menu item
allows you to create or change a Personal
Identification Number (PIN).
&
Select
Set/Change code
é
If no code exists yet, the menu item is set to
Set code.
Source
Source
Setup
This menu allows you to indicate the peripheral
you connected to one of the external inputs.
&
Press the cursor right to enter the list of types
of peripherals attached to the selected input.
é
Select the peripheral device with the cursor
up/down.
Once you have selected the source type, e.g.
DVD, this source will automatically be selected
when your remote control is in DVD mode,
see p. 4, and when you press the v key on
the remote control.
Decoder
Setup
.
EXT1
EXT2
EXT3
EXT4
SIDE
Centre input
Centre in volume
Dig audio in 1
Dig audio in 2
Decoder
Programme
Status
If a code has previously been entered, the
menu item is set to Change code. Follow the
instructions on screen.
Important:You have forgotten your code !
&
Select
Change code
press
.
OK
é
Press the cursor right and enter the overriding
code 8-8-8-8.
"
Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
Centre input - Centre in volume
When you have connected a surround receiver
to the TV, see p. 23, the loudspeakers of the
TV can act as centre speaker, making a separate
centre speaker unnecessary.
Select
Centre input On
case you have connected a Cinema Link
Surround receiver).
When having selected
Centre in volume with the cursor left/right to
correct volume level differences of the external
audio receiver and speakers.
Note: This is not the case with a Cinema Link
surround receiver.
Digital audio in 1 or 2
&
Select
Dig audio in 1
é
Select one of the corresponding connections in
the list when you connected your digital device
together with the additional audio cable you
connected to one of the digital audio in
sockets of your TV. See Connect Peripheral
equipment, Digital equipment, p. 21.
If a decoder or a descrambler is connected, see
p. 21, you can define one or more programme
numbers as decoder programme numbers.
&
Select
Decoder
é
Select
Programme
"
Select the programme number under which
you have stored the programme coming from
your decoder.
'
Select
.
Status
• Select the input used to connect your decoder:
,
or
None
EXT1
• Select
None
if you do not want the selected
programme number being activated as a
decoder programme number.
Note: Select
EXT2
to your EasyLink video recorder.
in the General menu and
or
Cinema Link
you can adjust the
On
or
.
2
with the cursor right.
.
.
EXT2
when the decoder is connected
(in
11
Hide quick links:
Advertisement
Table of Contents
