Use Of The Remote Control Rc4306 - Philips 42PF9956/37B User Manual

Use of the remote control RC4306

Note: For most buttons pressing a button once will activate the function. Pressing a second time will de-activate it.
When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the
list. The list will be removed automatically after 6 seconds or press
DVD/R CBL TV VCR AUX
Press the Select button
repeatedly to select one of the
system modes in which the
remote control can be used.
If no action is being undertaken
within 2 seconds, the remote
control returns to TV mode.
After an action in the selected
system mode the remote control
will remain in this mode for 60
seconds and will then return to
TV mode.
Display information
INFO
Press to display (when available)
information about the selected
TV channel and program.
Menu/Remote control info
When a menu is on screen, press
the INFO button to display info
on the selected menu item.
While the menu info is displayed,
press any button (except the
MENU or digit buttons) to
display remote control info.The
normal function of the button is
not executed.
®ºÒ‡π†
Audio and Video equipment
buttons. See p. 21.
For direct selection of antenna
TV
input e.g. to easily swap between
the HD input and your TV
channels.
Closed Caption
CC
On/Off/On during mute
Press this button to activate
OK
your choice or to confirm when
in the menus.
no function
PIP
Volume
VOL
Press + or - to adjust the
volume.
Interrupt the sound or
MUTE
restore it.
to remove immediately.
OK
POWER
DVD/R CBL TV VCR AUX
® º
INFO SELECT DNM
Ò ‡ π †
TV CC SURR HD
SCREEN
SURF FORMAT
®
OK
® ®
®
PIP MENU MENU
+ +
VOL CH
MUTE
- -
1 2 3
4 5 6
7 8 9
0 -
AV+
ACTIVE
SAP CONTROL CLOCK
POWER
Press to turn on/off the TV from or
to standby mode.
The TV is never powered off completely
unless it is physically unplugged.
DNM
Digital Natural Motion on/off
In the right part of the screen
Digital natural motion is turned on.
Keep the button pressed a bit longer
to set the different modes for flicker
reduction, motion compensation and
resolution enhancement.
Sound mode
SURR
Incredible surround
With stereo transmission, and when
Incredible surround is selected, it
seems as though the loudspeakers
are spread further apart from one
another.
Virtual Dolby Surround
Optimal with Dolby Surround
signals. Enables you to experience
the effect of Dolby Surround Pro
Logic, reproducing a rear sound
effect. See Sound menu, 3D
Surround effect, p. 12.
Note:You can make the same selection
in the Sound menu, Sound mode, p. 12.
Press this button to use the
HD
remote control directly in the HD
mode for HD devices (eg. Set Top
box).
0/9 Digit buttons
To select a TV channel.
For a two digit program number,
enter the second digit before the
dash disappears.To switch
immediately to a selected one digit
TV channel, keep the digit button
pressed a bit longer.
Keep this button pressed and
AV+
then press repeatedly to select
, ,
AV2 AV3 (HDMI) SIDE
channels when in TV mode,
according to where you connected
the accessory devices (p. 20).
- To type the dot (.) for digital
channels.
,
AV1
or TV
3 3