Hdmi (High Definition Multimedia Interface) Connector; Multi Channel Surround Receiver - Philips 42PF9956/37B User Manual

HDMI (High Definition Multimedia Interface) connector

AUDIO
CENTRE
SUBW.
2
1
Connect the digital HDMI output of your HD device (e.g. PC, DVD player, Set Top Box..) 1 to the
&
connector of your TV.
HDMI
In case a HD-DVI device (and if audio is present) is connected also connect the audio cable 2 to the
é
outputs of your HD device and to the
AUDIO
inputs of the panel of the TV.
Notes:
- Proper working is only guaranteed with HDMI compliant consumer products.
- Digital devices from different manufacturers have the possibility of differing output standards which may cause
difficulties for the television to properly display;
- If the set is cold, there may be a small "flicker" when the set is turned on. This is normal, there is nothing wrong
with the set.
- In case no signal is detected from your HDMI device, turn off the HDMI device and then on again.
To get an optimal viewing, it is advised to switch your DVD player to one of the following TV display standards:
720x480p, 720x480i, 1280x720p or 1920x1080i.

Multi channel Surround receiver

AUDIO
CENTRE R
L
SUBW.
2
HDMI is the leading new standard for Digital High
HDMI IN
Definition video and audio interconnection. Eg. with a Digital
R
R
Set top box, with HDMI-equipped devices like a PC, DVD-R,
HDMI
AV receiver...
Note: the HDMI connector is compatible with DVI-devices and a
L
L
HDMI to DVI conversion cable is included. (Then also connect the
audio cables.)
The
- the following TV and monitor display modes:
1
- uncompressed HD content
- encrypted or non encrypted signals.
&
Connect the audio cable to the multi channel Surround receiver
and to
connector of your TV 1.
Note: turn off the TV and your surround receiver before connecting
them. Set the Surround receiver's volume to minimum.
1
é If you want the loudspeakers of your TV to act as center
speaker, also connect an audiocable to the multi channel
Surround receiver and to the
2.
" Select
The loudspeakers of the TV will now only produce center
sound, the loudspeakers connected to the audio receiver will
produce Surround Sound.The volume has to be controlled via
the multi channel Surround receiver.
Note: No sound will be heard when a TV channel or external source is
blocked via the Channel Lock menu (see p. 13).
connector allows
HDMI IN
EDTV 640/720 x 480p
HDTV 1920 x1080i
1280 x 720p (only with 50PF9956)
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
AUDIO RECEIVER R
AUDIO RECEIVER L
in the Source menu. See p. 9.
Center Input On
60 Hz
60 Hz
60 Hz (only with 50PF9956)
(right) and (left)
L HDMI (AV3)
and next to the
R CENTRE
connector of your TV
CENTRE
19