Amazon Alexa - JVC KD-T915BTS Instruction Manual

AMAZON ALEXA

Alexa is the cloud-based voice service developed by Amazon. You can ask
Alexa to play music, get weather reports, traffic information, control smart
home devices, shop on Amazon, search the internet, set reminders and
more.
Preparation:
• Create an account at <www.amazon.com>, or use the Alexa mobile
application.
• After installing the latest version of the Alexa mobile application on your
device, log in using those credentials.
• Be sure to enable the internet connection on your smartphone.
Setup for the first time
For Android device
1
Pair your device with this unit via Bluetooth. (Page 20)
2
Start up the Alexa mobile application on your device.
3
Search and select the name of your receiver ("KD-T915BTS"/
"KD-T910BTS"/"KD-TD91BTS"/"KD-T91MBS"/"KD-T710BT"/
"KD-TD71BT"/"KD-SR86BT") on SETUP section of the Alexa mobile
application to complete a one-time setup process.
For iPhone/iPod touch
1
Pair your device with this unit via Bluetooth. (Page 20)
2 Start up the Alexa mobile application on your device.
3 Press on the unit to enter ALEXA source.
• You may also press B SRC repeatedly to select iPod BT source.
4 Search and select the name of your receiver ("KD-T915BTS"/
"KD-T910BTS"/"KD-TD91BTS"/"KD-T91MBS"/"KD-T710BT"/
"KD-TD71BT"/"KD-SR86BT") on SETUP section of the Alexa mobile
application to complete a one-time setup process.
Once the setup process is completed, the Alexa mobile application will
establish a connection with this unit.
(except for KD-T711BT)
• The Alexa connection can be disconnected if:
– A2DP profile is disconnected
– Bluetooth is disconnected
– This unit is turned off
– Any other conditions depending on the connected device.
To establish Alexa connection again, reconnect the A2DP profile.
• Alexa connection cannot be established again if you:
– Reinstall Alexa mobile application
– Delete the paired device and perform pairing again (for Android device)
To establish Alexa connection again, perform the setup process again.
• You can check the Alexa connection from the Alexa mobile application.
If the name of this unit appears on the screen of "ALL DEVICES", you do not
need to perform setup process again.
27
ENGLISH