Bluetooth - Mobile Phone - JVC KD-T915BTS Instruction Manual

Cd receiver
Hide thumbs Also See for KD-T915BTS:
Table of Contents

Advertisement

Bluetooth®
• KD-T711BT/KD-T710BT/KD-TD71BT/KD-SR86BT, "
indicator(s) light(s) up.
• This unit supports Secure Simple Pairing (SSP).
• Up to five devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device will remain registered
in the unit even if you reset the unit. To delete the paired device, see
[DEVICE DELETE] on page 24.
• A maximum of two Bluetooth phones and one Bluetooth audio device can
be connected at any time. To connect or disconnect the registered device,
see [PHONE SELECT] or [AUDIO SELECT] in [BT MODE]. (Page 24)
However, while in BT AUDIO source, you can connect to five Bluetooth
audio devices and switch between these five devices. (Page 26)
• Some Bluetooth devices may not automatically connect to the unit after
pairing. Connect the device to the unit manually.
• When the battery of the connected Bluetooth device runs low, "Device
Name"
"LOW BATTERY" appears.
• Refer to the instruction manual of the Bluetooth device for more
information.
Auto Pairing
When you connect iPhone/iPod touch to the USB input terminal, pairing
request (via Bluetooth) is automatically activated if [AUTO PAIRING] is set to
[ON]. (Page 24)
Press the volume knob to pair once you have confirmed the device name.
Bluetooth — Mobile phone
" and/or "
"
Receive a call
When there is an incoming call:
• KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS:
The buttons will blink in the color you have selected in [RING COLOR].
(Page 23)
KD-T711BT/KD-T710BT/KD-TD71BT/KD-SR86BT:
The buttons will blink in the blinking pattern you have selected in
[RING ILLUMI]. (Page 23)
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected
time. (Page 23)
During a call:
• KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS:
The buttons stop blinking and illuminate in the color you have selected in
[RING COLOR]. (Page 23)
KD-T711BT/KD-T710BT/KD-TD71BT/KD-SR86BT:
The buttons stop blinking.
• If you turn off the unit or detach the faceplate, Bluetooth is disconnected.
21
ENGLISH

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents