AEG FAVORIT 55602 VI0P User Manual page 32

32 www.aeg.com
2. Press
• The indicators
• The indicator
flash.
• The display shows the current
setting: e.g.
3. Press
the setting.
4. Press the on/off button to confirm
the setting.
6.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
You can set the released quantity of rinse
aid between level 1 (minimum quantity)
and level 6 (maximum quantity). Level 0
will deactivate the rinse aid dispenser
and no rinse aid will be released.
Factory setting: level 4.
How to set the rinse aid level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
and
display is blank.
2. Press
• The indicators
• The indicator
flash.
• The display shows the current
setting: e.g.
– The levels of rinse aid are
– Level 0 = no rinse aid is
3. Press
change the setting.
4. Press the on/off button to confirm
the setting.
.
,
go off.
continues to
= level 5.
again and again to change
,
start to flash and the
.
,
go off.
continues to
= level 4.
from 0A to 6A.
released.
again and again to
6.4 The rinse aid empty
notification
and
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the
rinse aid indicator is turned on notifying
to refill rinse aid. If you are using multi-
tabs containing rinse aid and you are
satisfied with the drying result, you can
deactivate the notification for refilling
rinse aid. However, we recommend that
you always use rinse aid for best drying
performance.
If you use standard detergent or multi-
tablets without rinse aid, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse
aid empty notification
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
and
display is blank.
and
2. Press
,
• The indicators
• The indicator
and
• The display shows the current
3. Press
= the rinse aid empty notification is
deactivated.
4. Press the on/off button to confirm
the setting.
6.5 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
,
start to flash and the
.
,
go off.
flash.
setting: = the rinse aid empty
notification is activated (factory
setting).
to change the setting.
and
,
and
continues to