Honeywell Prestige IAQ THX9000 System Installation Manual page 11

Installer setup tables
Setup functions
431 Ventilation Lockout Temperatures
433 Ventilation Lockout High Outdoor Humidity
450 A-Coil Low Temperature Cutoff
500 Replacement reminders
502 Furnace filter runtime counter
525 Installer Custom Reminders
530 Adaptive Intelligent Recovery
540 Number of schedule periods
580 Minimum compressor off time
600 Temperature range stops
640 Clock format
650 Extended fan on time(s)
670 Keypad lock
680 Temp. control (heat)
690 Temp. control (cool)
695 Finish on High Heat Stage
696 Finish on High Cool Stage
700 Indoor display offsets
Customer contact information (optional, but recommended)
1100 Dealer name
1150 Dealer phone number
1200 Dealer email address
1250 Dealer website
1300 Dealer Message
Note: All installer options, including Dealer name, contact information and message can
be set up as a file and downloaded via the USB port on the thermostat.
Restore Factory Defaults
Under the Menu, Installer Options and Advanced Options is a button to
"restore factory defaults."
If pressed, it will reset the program schedule and most installer setup
options (exceptions: 1350, 1355, 1400, 1405, 1410, 1500 and 450) and
disconnect the thermostat from the Equipment Interface Module.
(factory default setting listed, other options available)
11
2-wire Prestige® IAQ and RF EIM
None
Off; 75° dewpoint if On
None
Off
Count heat and cool
Add Customer Reminder
On
4
5 minutes
90° F (32° C); 60° F (15.5° C)
12-hour
Off
Unlocked
Standard
Standard
No
No
No offset
Your company name
Your telephone contact
Your email address
Your web site
Edit
69-2445EFS—03