Auxiliary Switch Accessory For ML6984 and ML7984 INSTALLATION INSTRUCTIONS APPLICATION The 272630D auxiliary board is an optional circuit board that is used in conjunction with Series 4000 ML6984 and ML7984 globe valve actuators. This auxiliary board combines the function of an adjustable low voltage SPDT auxiliary switch with a 2-10 Vdc or 4-20 mA position feedback signal.
Page 2
T5-T6 are powered, and flash when may occur. Mount the actuator to the valve the actuator is in motion. before connecting to power. NOTE: 272630D requires that the actuator be Assembly continuously powered, so ML6984 must be wired in "5-wire" configuration.
Page 3
The 272630D provides: 1. A 2-10 Vdc voltage proportional to the valve stem position. This output is capable of sourcing up to 20 mA dc drive current. 2. An isolated "Form C" relay contact closure that energizes when the valve is open more than the setting of the trimmer potentiometer ("trim pot").
Page 4
Automatic and Control Solutions Honeywell International Inc. Honeywell Limited-Honeywell Limitee 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN Scarborough, Ontario 55422 M1V 4Z9...