Table of Contents
Advertisement
Section 3 - Configuration
Click the Virtual Volume icon in the Disk Management window or the Virtual Volume link in the left window to configure
the virtual volume. The Virtual Volume allows the ShareCenter Pro to expand its iSCSI capacity. By utilizing the built-in iSCSI
initiator, the ShareCenter Pro will be able to connect to other iSCSI targets on the network and convert them into virtual
volumes. These virtual volumes are seen as multiple single volumes on the ShareCenter Pro. Up to 8 virtual volumes can be
stacked. The ShareCenter Pro acts as the storage stack master server. Virtual Volumes can be used to store and backup data,
just like a local volume.
Create
Click the button to add a virtual volume.
Edit
Select a target and click the button to change the
settings.
Delete
Select a target and click the button to remove a virtual
volume or a target from the list.
Format
When using the virtual volume for the first
time, the volume must be formatted before
mounting to the ShareCenter Pro.
Connect/
Click Connect to link to a virtual volume. Click
Disconnect
Disconnect to terminate the connection.
D-Link ShareCenter Pro 1200-05 User Manual
Virtual Volume
93
Advertisement
Table of Contents
