7.
It takes from 3 to 12 hours to finish charging the battery since the system is
booted. After that, the log "Controller ID:x Battery Charge Completed" is
registered in MSM log and Windows application log. Make sure that the Current
Write Policy (indicating write cache operation status) is indicated as "Write Back."
The battery cell you have purchased is not charged at all. For such
battery cell, the [Current Write Policy] in [Properties] of [Logical] tab is
indicated as "Write Through" on MSM.
Notice
You can check the charged status of battery cell by selecting [Relative
State of Charge] or [Absolute State of Charge] in [Physical] tab
[Properties] on MSM.
If you changed the Write Policy from [Write Through] to [Write Back],
MSM displays the correct message, but Windows Event Log
(application) indicates that change was made contrarily.
For details of the Write Policy, refer to the User's Guide of the disk array
controller or MSM User's Guide (online document in the CD-ROM coming
with the server).
Tips
Logical
Properties
Current Write Policy
Default Write Policy
53