Advertisement
10. Close the door located on the top of the TouchCenter keypad
11. Press the OK button. The TouchCenter will reset and return to
the Home screen with your new Home Page displayed.
To return to the Default Home Page in your TouchCenter
Keypad, proceed as follows:
1. Open the door located on the top side of the TouchCenter
keypad.
2. Insert the MMC/SD card that contains your Custom Home
Screen into the TouchCenter with the contacts at the bottom
and facing the front of the TouchCenter. Press the card in a
downward direction until it latches into the slot.
3. From the Home screen, advance to the "Advanced Setup"
menu
screen by pressing the following buttons
and codes as displayed:
SECURITY > MORE CHOICES > SETUP > ADVANCED
SETUP > Enter Authorized Code
4. Press the KEYPAD RESET Button. You will be asked if you
wish to do a Processor Reset.
5. Press OK. You will see a message that the "System is
Resetting" followed by the HOMEPAGE DOWNLOAD
PROGRAM screen.
(NOTES: If the TouchCenter has been programmed for
supervised operation, the system will report a
trouble during the Custom Screen Installation
and Reset process.
The system will not report alarms during the
Custom Screen Installation and Reset process.)
6. To return to your default home page, press DEFAULT
HOME PAGE. You will receive a "Started" message
followed by a "Completed" message when the default
home page has been reloaded.
6271R0
23/10/07
Page 8 of 8
Advertisement
