Advertisement
To load your Custom Home Page into your TouchCenter Keypad,
proceed as follows:
1. Open the door located on the top side of the
TouchCenter keypad.
2. Insert the MMC/SD card that contains your Custom
Home Screen into the TouchCenter with the contacts
at the bottom and facing the front of the TouchCenter. Press the
card in a downward direction until it latches into the slot.
3. From the Home screen, advance to the "Advanced Setup" menu
screen by pressing the following buttons and codes as
displayed:
SECURITY > MORE CHOICES > SETUP > ADVANCED SETUP
> Enter Authorized Code
4. Press the KEYPAD RESET Button. You will be asked if you
wish to do a Processor Reset.
5. Press OK. You will see a message that the "System is
Resetting" followed by the HOMEPAGE DOWNLOAD
PROGRAM screen.
(NOTES: If the TouchCenter has been programmed for supervised
operation, the system will report a trouble during the
Custom screen Installation and Reset process.
The system will not report alarms during the Custom
Screen Installation and Reset process.)
6. To download your Custom Home Page press CUSTOM
HOMEPAGE. You will receive a "Started" message
followed by a "Completed" message when the
MMC/SD card has been read.
7. Press the HOME button. You will return to the
HOMEPAGE DOWNLOAD PROGRAM screen.
8. Press RESET DEVICE. You will receive a message to
remove the MMC/SD card.
9. Press the MMC/SD card in a downward direction to unlatch it
and remove the MMC/SD card from the TouchCenter.
6271R0
23/10/07
Page 7 of 8
Advertisement
