Communications Antenna Installation Notes - Honeywell Bendix/King KMA 30 Manual

Audio panel with marker beacon receiver, high-fidelity stereo intercom
Hide thumbs Also See for Bendix/King KMA 30:
Table of Contents

Advertisement

Unswitched Input 3 Volume, adjust from 50% to 200% of input value. (Bottom cover must be
removed).
Figure 2-5 – Unswitched 3 Audio Level (bottom cover removed)

2.8 Communications Antenna Installation Notes

For best results while in Split Mode, it is recommended that the one VHF communications antenna is lo-
cated on top of the aircraft while the other communications antenna is installed on the bottom. Any an-
tenna relocation must be accomplished in accordance with AC 43.13-2B, aircraft manufacturers' recom-
mendations and FAA-approved technical data.
It is probable that radio interference will occur in the split mode when the frequencies of the two air-
craft radios are adjacent, and/or the antennas are physically close together. Bendix/King makes no
expressed or implied warranties regarding the suitability of the KMA 30 in Split Mode.
200-890-5464
Bendix/King by Honeywell
KMA 30 Audio Panel and Intercom System
Installation and Operator's Manual
WARNING
Page 2-10
Rev. 1, Aug. 2012

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents