5.4.3
Transferring the setup in MindSphere
When the MindSphere data source setup is transferred, the data points are set up in the
asset and are made available in MindSphere.
The data can, for example, be displayed in the fleet manager or processed with another
MindSphere application.
5.4.4
Starting MindSphere data transfer
After the setup has been transferred, the data points must be linked individually in
MindSphere. Data transfer to MindSphere can be started in the Web user interface →
Settings "MindSphere" or set to autostart so that it starts after power on.
Of course, the service can be stopped and started again, e.g. if reparameterization (see
chapter Grouping the information (Page 52) and Transferring the setup to MindSphere
(Page 55)) is necessary.
7KN POWERCENTER 3000
Manual, 10/2019, L1V30579222003-01
5.4 Communication with MindSphere
Functions
55