Design Of The Devices - Siemens SENTRON 7KN POWERCENTER 3000 Manual

Description

3.2 Design of the devices

3.2 Design of the devices
Interfaces and connections
①
②
③
④
⑤
⑥
⑦
The ON/OFF pushbutton has four functions:
● Switch on the 7KN Powercenter 3000: Press once briefly
● Shut down the operating system and switch off the 7KN Powercenter 3000: Press once
briefly
● Switch off the 7KN Powercenter 3000 without shutting down the operating system
(hardware reset): Press for longer than 4 seconds
● Restoring the factory settings (with communication): Multiple pressing of the pushbutton
(> 4 seconds) at approx. 1 second intervals
Note
The device starts up immediately when it is energized.
To switch on the device, you therefore do not need to operate the ON/OFF pushbutton.
14
PE conductor
Connection for the 24 V DC power supply
2 x USB 3.0 port, high current
Not used
2 x RJ45 Ethernet port X1P1 and X2P1 for 10/100/1000 Mbps
ON/OFF switch
LED displays
7KN POWERCENTER 3000
Manual, 10/2019, L1V30579222003-01