Entering Tmo / Dmo Mode; Transmit Inhibit Mode - Motorola MTM800 FuG Feature User Manual

Feature User Guide
Keylock Setup

2.8 Entering TMO / DMO Mode

Procedure Steps
1 From the home screen, press Optns.
2 Select Trunked Mode / Direct Mode.
Networks
Selecting Network Operation Mode

2.9 Transmit Inhibit Mode

The Transmit Inhibit Mode is a mode in which the radio sends no radio transmissions. It is recommended to
activate the mode in RF sensitive areas, for example hospitals, airplanes, where safety can be jeopardized due
to transmission radiation.
To activate, select MENU → Networks → TXI Mode → Activate.
In this mode, the radio does not transmit under any circumstances except for the Emergency Calls. All the functions
and keys which cause transmission, for example registration to the network, changing talkgroup or folder, sending
SDS messages, or pressing the PTT button are disabled. Any transmission trial causes the radio to display Not
Allowed In TXI Mode notification and to play a tone.
Your radio can still receive:
• Group calls.
• Messages — stored in the Inbox.
• Private call attempts — stored in the Missed Calls list, without the option to respond.
When no danger to safety exists anymore (for example, you leave the RF sensitive area), you can deactivate the
Transmit Inhibit Mode and the radio returns to standard operation.
You can deactivate the mode by selecting MENU → Networks → TXI Mode → Deactivate, pressing One-Touch
button, or implicitly when initiating an Emergency Call.
RF Transmissions from the radio are prevented under the following conditions:
• TXI Mode is activated.
• The radio is turned off.
2-16 -