Cisco Nexus 7000 Series Quick Start Manual page 5

Figure 3
1 On the second memory slot on the
Rotate both ejector levers away from the front of the I/O module.
Step 13
If the I/O module had a metal cover, as shown in
Step 14
to the back of the I/O module by screwing in all the 14 screws before proceeding
to the next step.
Grasp the front of the module with one hand and place your other hand under the
Step 15
module to support its weight.
78-100406-01
Adding a DIMM
front of the I/O module, rotate both
spring clips out.
Replacing Memory on a Cisco Nexus 7000 Series I/O Module
Replacing a DIMM on an I/O Module
1
2 Holding the DIMM by its edges,
align it to the second memory slot
and push it into place until the
spring clips click into the DIMM.
Figure 1, secure the metal cover
2
1
5