Bosch PFS 3000-2 Operating Instructions Manual

Bosch PFS 3000-2 Operating Instructions Manual

Advertisement

Quick Links

OBJ_BUCH-2024-004.book Page 17 Tuesday, April 21, 2015 11:16 AM
Geben Sie bei allen Rückfragen und Ersatzteilbestellungen
bitte unbedingt die 10-stellige Sachnummer laut Typenschild
des Produkts an.
Deutschland
Robert Bosch GmbH
Servicezentrum Elektrowerkzeuge
Zur Luhne 2
37589 Kalefeld – Willershausen
Unter www.bosch-pt.com können Sie online Ersatzteile be-
stellen oder Reparaturen anmelden.
Kundendienst: Tel.: (0711) 40040480
Fax: (0711) 40040481
E-Mail: Servicezentrum.Elektrowerkzeuge@de.bosch.com
Anwendungsberatung: Tel.: (0711) 40040480
Fax: (0711) 40040482
E-Mail: kundenberatung.ew@de.bosch.com
Österreich
Unter www.bosch-pt.at können Sie online Ersatzteile bestel-
len.
Tel.: (01) 797222010
Fax: (01) 797222011
E-Mail: service.elektrowerkzeuge@at.bosch.com
Schweiz
Unter www.bosch-pt.com/ch/de können Sie online Ersatz-
teile bestellen.
Tel.: (044) 8471511
Fax: (044) 8471551
E-Mail: Aftersales.Service@de.bosch.com
Luxemburg
Tel.: +32 2 588 0589
Fax: +32 2 588 0595
E-Mail: outillage.gereedschap@be.bosch.com
Entsorgung
Sprühpistole, Elektroeinheit, Zubehör und Verpackungen sol-
len einer umweltgerechten Wiederverwertung zugeführt wer-
den.
Werfen Sie Elektrowerkzeuge nicht in den Hausmüll!
Nur für EU-Länder:
Gemäß der Europäischen Richtlinie
2012/19/EU über Elektro- und Elektronik-
Altgeräte und ihrer Umsetzung in nationales
Recht müssen nicht mehr gebrauchsfähige
Elektrowerkzeuge getrennt gesammelt und
einer umweltgerechten Wiederverwertung
zugeführt werden.
Änderungen vorbehalten.
Bosch Power Tools
English
Safety Notes
General Power Tool Safety Warnings
Read all safety warnings and all instruc-
WARNING
tions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
Work area safety
 Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
 Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
 Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
 Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
 Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
 Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
 Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
 When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
 If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Personal safety
 Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
 Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal inju-
ries.
English | 17
1 609 92A 162 | (21.4.15)

Advertisement

Table of Contents
loading

Summary of Contents for Bosch PFS 3000-2

  • Page 1 Read all safety warnings and all instruc- WARNING 37589 Kalefeld – Willershausen tions. Failure to follow the warnings and Unter www.bosch-pt.com können Sie online Ersatzteile be- instructions may result in electric shock, fire and/or serious stellen oder Reparaturen anmelden. injury.
  • Page 2 Products sold in AUS and NZ only: Use a residual current device (RCD) with a rated residual current of 30 mA or less. 1 609 92A 162 | (21.4.15) Bosch Power Tools...
  • Page 3 See “Adjusting the Air Flow”, page 24. Step 3: Set “wood” application on the Set “wall” application on the Set the air flow sliding switch 24 sliding switch 24 Bosch Power Tools 1 609 92A 162 | (21.4.15)
  • Page 4: Product Description And Specifications

    Engineering PT/ETM9 10 Nozzle cap (grey: for a “wood” application) 11 Filling sieve 12 Transfer bucket* 13 Nozzle needle Robert Bosch GmbH, Power Tools Division 14 Container seal 70764 Leinfelden-Echterdingen, GERMANY 15 Suction tube Leinfelden, 02.04.2015 16 Ventilation hole Noise/Vibration Information...
  • Page 5: Preparing For Operation

    – Put the air cap 2 on the nozzle cap and tighten it with the thoroughly cleaned filling sieve 11 on the container 7 to union nut 3. hold back any lumps of paint when pouring in. Bosch Power Tools 1 609 92A 162 | (21.4.15)
  • Page 6: Starting Operation

    – Be absolutely sure to hold the spray gun at a consistent dis- tance of 20–25 cm perpendicular to the spray object. – Begin the spraying procedure outside the target area. 1 609 92A 162 | (21.4.15) Bosch Power Tools...
  • Page 7: Maintenance And Service

    If the replacement of the supply cord is necessary, this has to be done by Bosch or an authorized Bosch service agent in or- der to avoid a safety hazard. Not enough material on target...
  • Page 8: Correction Of Malfunctions

    Container seal 14 not positioned or not cor- Mount the container seal 14 precisely all rectly positioned in groove of suction tube around in the suction tube groove Nozzle cap 9/10 loose Tighten the nozzle cap 9/10 1 609 92A 162 | (21.4.15) Bosch Power Tools...
  • Page 9 Uxbridge Gauteng – BSC Service Centre UB 9 5HJ 35 Roper Street, New Centre At www.bosch-pt.co.uk you can order spare parts or arrange Johannesburg the collection of a product in need of servicing or repair. Tel.: (011) 4939375 Tel. Service: (0344) 7360109 Fax: (011) 4930126 E-Mail: boschservicecentre@bosch.com...
  • Page 10: Avertissements De Sécurité Généraux Pour L'outil

     Ne pas se précipiter. Garder une position et un équi- libre adaptés à tout moment. Cela permet un meilleur contrôle de l’outil dans des situations inattendues. 1 609 92A 162 | (21.4.15) Bosch Power Tools...

Table of Contents