Honeywell Miller RACDTA-5K6/6FT User Instruction Manual page 17

Us er Ins tru ct ion s - Engl is h
BACK PLATE MOUNTING
Torque Range:
to be determined
by an Engineer or
qualified person.
* Bolt or All-thread and nut not included with Back Plate.
Back Plate to be used with 5/8" (16mm)
bolts or all thread. Drill hole perpendicu-
lar into surface so bolt can pass freely
through the substrate. Nut must be fully
threaded on the bolt to insure maximum
strength ratings and integrity of anchor.
17