Led Indicators – Status Of An Amplifier Channel; Led Of Amplifier Channel 1 - Honeywell VARIODYN D1 Comprio Operation Instruction Manual

Operation Instruction VARIODYN
LED indicators – Status of an amplifier channel
The functioning of the amplifiers is constantly monitored. The result of this check is indicated by the LEDs of the
amplifier channels CHANNEL 1 and 2 (see Fig. 4). The following status indications are possible:
CHANNEL 1
1 2 3 4 5 6
Fig.4: LED of amplifier CHANNEL 1 (example)
OFF
ON, green
Flashing green
ON, yellow
ON, red
12
®
D1 Comprio
100 V amplifier channel not in use
100 V amplifier channel connected and ready for operation
100 V amplifier channel currently prelistened
100 V fault - amplifier channel defective
Alarm connection for amplifier channel active (indication depends on the
hardware model)
FB 798666.HO.GB0 / 07.13