Advertisement
Page
Ver.
Item
Auto Iris
Iris Override
Knee
Iris Override
APL Ratio
DetMod
SkinMod
Skin phase
Skin width
Skin sat
Auto hue
Auto Knee
Point
Auto Knee
Slope
Stand
VF DTL
Alone
VF DTL
H Phase
SC Phase
Cable COMP
SNG Bars
Master Black
Iris Override
CF Pulse
Skin Detail
Auto Hue
w)
1
Shaded pattern
shows an area weighed in the auto-iris detection mode.
BKP-5090
Settings
Contents
_99 to 99 ([0])
Sets the reference value for automatic iris adjustment.
_99 (further closed) ↔ 99 (further opened)
On, [Off]
Turns the auto-iris override function on and off.
_99 to 99 ([0])
Sets the way the iris is automatically adjusted.
_99 (PEAK) ↔ 99 (AVERAGE)
[1], 2, 3, 4, 5,
Selects the auto-iris sensitivity pattern
1:
2:
3:
4:
5:
[nor], Skn
nor:
Skn : Auto-iris adjustment is performed for an object which has
0 to 359 ([XX])
Sets the color phase that is the center of the color area where the skin
mode function is to be activated when "Skn" is selected in the above
DetMod item
0 to 90 ([XX])
Sets the width of the color area around the skin phase where the skin
mode function is to be activated when "Skn" is selected in the above
DetMod item
_99 to 99 ([XX])
Sets the saturation for which the skin mode function is to be activated
when Skn is selected in the above DetMod item
Throw MENU SELECT
Sets the skin mode hue function automatically
switch to ENTER
(If executed, each value for the above items Phase, Width and Sat is
to execute.
updated)
_99 to 99 ([XX])
Sets the point on which the knee function starts to have effect in the
auto-knee mode.
_99 to 99 ([XX])
Sets the volume of the effect of the knee function in the auto-knee
mode.
_99 to 99 ([XX])
Adjusts the level for the VF detail
[On], Off
Turns the VF detail function on and off
_99 to 99 ([XX])
Sets the horizontal phase of the camera in the genlock mode.
0 to 360([XX])
Sets the subcarrier phase of the camera in the genlock mode.
On, [Off]
Turns on and off the cable compensation circuit for the external sync
signal in the genlock mode.
On, [Off]
Turns the color-bar signal for SNG on and off.
_99 to 99 ([0])
Adjusts the Master Black level.
On, [Off]
Turns the auto-iris override function on and off.
[On], Off
Turns on and off the color framing pulse supplied to the VTR.
On, [Off]
Turns the skin tone detail function on and off.
Throw MENU SELECT
Sets the skin detail hue function automatically.
switch to ENTER
(Locate the desired skin color within the gate marker of VF and measure.)
to execute.
2
3
Suppresses the sensitivity in the upper area of the picture
Suppresses the sensitivity in the surrounding area except the
center of the picture
Suppresses the sensitivity at the left and right edges of the picture
The sensitivity uniform to the entire picture
Suppresses the sensitivity in the lower area of the picture
Normal mode (Selectable from the above five patterns)
specific color tones
4
4-1. Setup Menu (BVP-500 series)
4-1-1. Operation Menu
w)
5
4-5 (E)
Advertisement
