Installation Of Program (Bzs-7080) - Sony BKDS-7017 Installation Manual

6-2. Installation of Program (BZS-7080)

6-2. Installation of Program (BZS-7080)
Before using DVS-7150 system, the operating program of operation software BZS-7080 (option) is
installed to the flash memory in the system.
The program on the flash memory is not cleared by turning the power ON/OFF.
If finishing this process, do not load this process till the version-up of the software is executed.
For the program installation, execute "6-2-1. Down Load of Program", "6-2-2. Initializing of Data on
RAM" and "6-2-3. Initializing of Nonvolatile Memory".
n
If executing the program installation, the set-up data on the Nonvolatile memory is initialized to the
default status and the data (snap shot and key frame) on the RAM are cleared.
When executing the version-up of the software except for the first program installation, execute the
following processes.
. Before the program installation is executed.
Save the set-up, snap shot and key frame data into a floppy disk.
. After the program installation is finished.
(1) Load the saved set-up, snap shot and key frame data from the floppy disk.
(2) For saving the loaded set-up datum into the nonvolatile memory, refer to user's guide BZS-7080.
For details of these processes, refer to user's guide BZS-7080.
6-4
DVS-7150E IM