NEC Aspire Series Networking Manual page 32

Setting Up The Networking Feature
IP Networking
Item
Item
No.
01 -- Not Used --
02 Number of G711 Audio Frame
03 G711 Silence Detection Mode
04 G711 type
05 G729 Audio Frame
06 G729
07 G.729 Jitter Buffer Minimum
08 G.729 Jitter Buffer Type
09 G.729 Jitter Buffer Maximum
10 -- Not Used --
22 ◆
Example:
System ID: 1
IP Address: 172.16.0.11
(from Program 10-12-01)
➻
11-02-01 : Extension Numbering
Assign the extension numbers to the ports. The extension number can be up to eight digits
long. The Þrst/second digit(s) of the number should be assigned in Program 11-01. This lets
an employee move to a new location (port) and retain the same extension number.
➻
84-01-xx : CODEC Information Basic Setup
DeÞne the data of H.323 trunks. These settings apply to H.323 Trunks only. Refer to Program
84-12-xx for H.323 extensions and IP networking.
Note that the value of Item 33 (Audio Capability Priority) determines which CODEC settings
to use. This means, for example, that if G.711 is selected in Item 33, the settings in Items 5-12
and 19-21 will be ignored.
System – A
Port: 1730
Input Data Default
2 = 20 ms 3
3 = 30 ms
0:Disable 0
1:Enable
0:A-law 1
1: u-law
1 = 10 ms 3
2 = 20 ms
3 = 30 ms
4 = 40 ms
5 = 50 ms
6 = 60 ms
7 = 70 ms
8 = 80 ms
0:Disable 0
1:Enable
0-500 ms 30
0-500 ms 60
0-500 ms 120
System – B
System ID: 1
IP Address: 172.16.0.10
(from Program 10-12-01)
Port: 1730
Description
Maximum number of G711 Audio
Frame
DeÞne whether the silence detection
enables on G711 or not
Set the type of G711
(A-law or u-law)
Maximum number of G729 Audio
Frame
Networking