Setting The Audio - Audio Menu; Audio Tab - Sony BRC-X400 Operating Instructions Manual

Setting the Audio
— Audio Menu
When you click in the Administrator menu,
the Audio menu appears.
Use this menu to set the audio functions of the
camera.
The Audio menu consists of the [Audio] tab.

Audio tab

Setting
Make settings for sending audio.
Input selection
Select microphone input or line input.
Mic volume
When [Microphone] is selected in [Input selection],
set the volume level of the audio input from the MIC
terminal (audio input terminal). Choose a level in the
range from [–10] to [+10].
Audio level control
Select the checkbox to control the audio input level
to a suitable volume level automatically.
Equalizer
Use to change the frequency response of audio in
accordance with its use environment.
[Off]: Disable the Equalizer setting.
[Low cut]: Reduces the noise from air conditioners
and a projector, etc., and cuts low-frequency.
[Voice enhancement]: Enhances the voice clearly,
cutting low- and high-frequency.
Send
Enable
Select the checkbox to deliver streaming audio from
the camera.
Audio codec
Select the codec type for sending audio.
[AAC (256kbps)]: Select this type when you
prioritize the audio quality.
[AAC (128kbps)]: Select this type when you
prioritize the data capacity.
This setting will not effect on the audio signal
superimposed on HDMI/SDI.
71