Viewing And Managing Connection-Rate Status; Viewing Connection-Rate Configuration - HP 3500yl Series Access Security Manual

Virus Throttling (Connection-Rate Filtering)
Configuring Connection-Rate Filtering
3-14

Viewing and Managing Connection-Rate Status

The commands in this section describe how to:
View the current connection-rate configuration
■
■ List the currently blocked hosts
Unblock currently blocked hosts
■

Viewing Connection-Rate Configuration

Use the following command to view the basic connection-rate configuration.
If you need to view connection-rate ACLs and/or any other switch configura-
tion details, use show config or show running (page 3-15).
Syntax: show connection-rate-filter
Displays the current global connection-rate status
(enabled/disabled) and sensitivity setting, and the cur-
rent per-port configuration. This command does not
display the current (optional) connection-rate ACL con-
figuration, if any.
HP Switch(config)# show connection-rate-filter
Connection Rate Filter Configuration
Global Status:
Sensitivity:
Port | Filter Mode
-------------+---------------
B13 | NOTIFY-ONLY
B14 | THROTTLE
B15 | BLOCK
B16 | BLOCK
Figure 3-4. Example of Displaying the Connection-Rate Status, Sensitivity, and Per-
Port Configuration
Enabled
Medium
Per-Port configuration for
connection-rate filtering