Unblocking A Currently Blocked Host - HP 3500yl Series Access Security Manual

Virus Throttling (Connection-Rate Filtering)
Overview of Connection-Rate Filtering
N o t e
3-6

Unblocking a Currently Blocked Host

A host blocked by connection-rate filtering remains blocked until explicitly
unblocked by one of the following methods:
Using the connection-rate-filter unblock command (page 3-16).
■
■ Rebooting the switch.
Disabling connection-rate filtering using the no connection-rate-filter
■
command.
Deleting a VLAN removes blocks on any hosts on that VLAN.
■
Changing a port setting from block to throttle, notify-only, or to no filter connec-
tion-rate, does not unblock a currently blocked host. Similarly, applying a
connection-rate ACL will not unblock a currently blocked host. Refer to the
above list for the correct methods to use to unblock a host.