Advertisement
STEP 6
Start firmware update
Press INFO button to start the update.
(Update process may take up to 15 minutes)
Caution!
DO NOT interrupt power during the update.
In case the power is accidentally cut off resulting in a condition where
you can't recover normal operation, refer to the troubleshooting
method CASE#2 on the last page.
When completed, "UPDATE SUCCESS" appears on the display
Turn off the power of the receiver by pressing MAIN ZONE button.
Remove USB thumb drive.
STEP 6
Check the updated firmware version
Power on the AV receiver and press the ON SCREEN button on the
remote control. Select "Information" > "System".
If the firmware version is "3.15", the AV receiver is up-to-date.
Congratulations!
You have completed the firmware update. Your AV receiver is ready
for normal use.
Firmware Update Procedure for RX-V2067
Firmware update in progress
MAIN ZONE
Page.5 of 6
STRAIGHT
INFO
Advertisement
