Advertisement
Firmware Update Through Internet
Requirement:
-Internet connection
Your receiver is connected to the Internet if you can receive Internet
radio stations. (See owner's manual for details)
STEP 1
Power off the receiver (Standby mode).
STEP 2
Enter the ADVANCED SETUP mode
While pressing the STRAIGHT button, press the MAIN ZONE ON/OFF
button and keep STRAIGHT button pressed until "ADVANCED
SETUP" appears on the front panel display.
(Note: "ADVANCED SETUP" is displayed only for a few seconds)
STEP 3
Select "FIRM UPDATE" from the menu
Press the PROGRAM button until "FIRM UPDATE USB" is displayed.
Then, press STRAIGHT button until "NETWORK" is displayed.
PROGRAM
Firmware Update Procedure for RX-V2067
MAIN ZONE
Page.2 of 6
STRAIGHT
Advertisement
