Honeywell Centraline LION Installation & Commissioning Instructions page 6

System Overview
Auxiliary Parts
Module Type
XS812
Manual disconnect
modules
XS812RO
XS814
XS830
Auxiliary terminal
package
XS831
Table 5 Auxiliary parts
Spare Parts
Module Type
Cross connectors (red) XS815
Connector bridge XS816
Swivel label holder XAL10
Swivel label holder XAL11
Table 6 Spare parts
EN1Z-0921GE51 R0315
Figure
A1 A2 A3 A4 A5 A6 A7 A8 A9 B1 B2 B3 B4 B5 B6 B7 B8 B9
A1 B1 A2 B2 A3 B3 A4 B4 G1 A5 B5 A6 B6 A7 B7 A8 B8 G2
Figure
6
Corresponding
I/O modules Information
CLIOP/CLIOL...
...821
Module allows disconnection of
...822
individual I/O signals.
...823
Module allows disconnection of
...824
individual I/O signals.
...825
For 24 V applications only.
Two groups of 7 terminals
All pluggable LION I/O
connected to each other for
modules
redistributing voltage.
Two groups of nine internally-
connected push-in terminals, for
distributing signals/power.
Two groups of four pairs of
CLIOP830A, only
push-in terminals, for converting
0...20 mA signals into
0...10 Vdc signals, and one
push-in ground terminal per
group.
Corresponding
I/O modules Information
CLIOP/CLIOL...
...824
Connects 6 relay commons.
...825
Connects CLLIONLC01 and I/O
All LION I/O modules
modules.
Can be plugged into socket, for
All pluggable LION I/O
attaching label generated by the
modules
engineering tool.
Can be plugged into module, for
attaching label generated by the
CLIOP830A, only
engineering tool.
NOTE: Phased out.
LION System