Table of Contents
Advertisement
Content Sharing on Webex Board
Sharing Content In a Call Using the Webex Board
1
In a call tap the Home
button.
3
Connect your presentation source via cable or
Proximity and tap Start sharing. You will now
share the selected content of your presentation
source.
D1543002 Cisco Webex Board Room Series User Guide
Produced: September 2019 for CE9.8
All contents © 2010–2019
Cisco Systems, Inc. All rights reserved
2
Tap the blue Share screen button.
To return to call now, tap the green field (Tap to
return to call) along the top of the screen.
4
Tap Stop sharing to halt your presentation.
About Content Sharing
Your Webex Board supports the
ability to show presentations in a
video call.
If your source device has been
Intelligent Proximity enabled, just
switch on Proximity on your device,
let your device pair with the Webex
Board and you will be able to share
content wirelessly.
Observe that you may change
the layout of the screen during
presentations, see the following
pages for more on this.
Note! Your Board may have been
configured to let one of the video
input connectors of your Board
share HDCP protected content, thus
allowing you to watch video through
Google ChromeCast, AppleTV or a
HD TV decoder etc.
This feature is available outside calls
only.
If you attempt to share content
through this specific video connector
while in a call, no content sharing will
take place. Instead, the part of the
screen normally allocated to content
sharing will turn black in order to
maintain the HDCP regime.
This will apply to any content you
attempt to share in a call via this
input connector — be it HDCP
protected or not.
30
Advertisement
Table of Contents
