Table of Contents
Advertisement
Video Calls
Activate Do Not Disturb Using a Touch10
1
Tap in the upper left corner, as shown.
D1543002 Cisco Webex Board Room Series User Guide
Produced: September 2019 for CE9.8
All contents © 2010–2019
Cisco Systems, Inc. All rights reserved
2
Tap Do not disturb, as indicated. To deactivate the feature,
repeat the procedure.
About Do Not Disturb
Your system can be set to not
responding to incoming calls. You
may, however, use it to call others
as much as you want.
Your video support team may have
set a time-out on this feature,
after which the system will return
to respond to incoming calls as
usual. Default time-out setting is 60
minutes.
Note that your video support team
may have disabled access to the set
of menus and options shown.
Using Room Kit Mini as a USB
camera.If you have registered your
Room Kit Mini, you may still use it as
a USB camera together with a PC
and a third-party video client. To
avoid conflicts due to overlapping
calls, the system will automatically
be put in Do Not Disturb Mode. This
cannot be changed by you.
If you choose to use the Room
Kit Mini as an unregistered device,
the above will not apply, since no
overlap of calls will be possible.
14
Advertisement
Table of Contents
