Adjustment Time - Kenwood TK-3180 Function Reference

TK-2180/ 3180
TK-7180/ 8180
3. Select the month and press [S].
TK-2180/ 3180
TK-7180/ 8180
4. Select the date and press [S].
TK-2180/ 3180
TK-7180/ 8180
5. Select the hour and press [S].
You can configure the time in 24 hours.
TK-2180/ 3180
TK-7180/ 8180
Version: 1.11
6. Turn the transceiver OFF after you complete
configuring the minute.
The time is now adjusted.
TK-2180/ 3180
TK-7180/ 8180
Note:
" The Key-entry Error tone sounds if you press [S] when the
entered value is invalid. In this case, the transceiver does not
move to the next item.
" The transceiver returns to Year Entry Mode when you press the
[S] after configuring the minute.
!
Configuration using KPG-89D
• Configuring the Clock Adjustment function (Refer
to 6.7.2 Common-Page 2 tab - Clock Adjustment.)

30.4 Adjustment Time

This function allows a user to adjust the time at the same
time when writing data to the transceiver using KPG-89D.
This function is enabled when the Adjustment Time
checkbox of the Write Data in the Transceiver window is
checked.
You can enable/ disable the Adjustment Time using KPG-
89D.
!
Configuration using KPG-89D
• Configuring the Adjustment Time (Refer to 7.2.1
Adjustment Time.)
Function Reference
30 CLOCK
157