Insulating the pipe located inside of the outdoor unit
f With a pipe insulator, insulate the pipe up to whole service valve located inside of the outdoor unit .
X
f Seal the gap between the outdoor unit pipe and the insulator . Rainwater and dewdrops may soak through the gap
X
between the pipe and the insulation of the outdoor unit installed on the outside .
f Separate the cover of the pipe and close it after insulation work . Only remove a knock-out hole cover where the
X
pipe will be installed . If the knock-out hole is open unnecessarily, it must be closed . If not, small animals such as
squirrels and rats may get into the unit through the hole and the unit may be damaged .
H/P
H/R
DVM S HE_IM_DB68-05461A-08_EN.indd 91
91
2017-03-24 오후 1:38:43