Starting The Programme - Beko WMB 51021 PL PT User Manual

If you want to spin the laundry held in
water, adjust the Spin Speed and press
Start / Pause button.
The programme resumes. Water
is drained, laundry is spun and the
programme is completed.
• Soaking
The Soaking auxiliary function ensures
better removal of stains ingrained into the
clothes by holding them in the detergent
water prior to startup of the programme.
• Funkcja Pupil (Pet hair removal)
This function helps you to remove the pet
hairs that remain on your clothes.
When this function is selected, your
machine adds pre-wash and additional
rinsing steps to the normal program
cycle. Thus, pet hairs are removed more
effectively by performing the washing with
more water (30%).
A Never wash your pets in your washing
machine.
Delayed Start (In some models only)
With the Delayed Start function the
startup of the programme may be delayed
up to 3, 6 or 9 hours.
C Do not use liquid detergents when
you set Delayed Start! There is the
risk of staining of the clothes.
1. Open the loading door, place the
laundry and put detergent, etc.
2. Select the washing programme,
temperature, spin speed and, if
required, the auxiliary functions.
3. Set the desired time by pressing
the Delayed Start button. When the
button is pressed once, 3 hours
delayed start is selected. When the
same button is pressed again, 6
hours delay is selected, and when
it is pressed for the third time, 9
hours delayed start is selected. If you
press the Delayed Start button once
again, Delayed Start function will be
canceled.
4. Press Start/Pause button. Previous
delayed start time light turns off and
next delayed start time light turns on
after every 3 hours.
5. At the end of the countdown, all
delayed start lights will turn off and
the selected programme will start.
C Additional laundry may be loaded
during the delayed start period.
Changing the Delayed Start period
Press Delayed Start button. Every time
the button is pressed, the period will
change in 3-hour increments and the light
of the selected delayed start time will turn
on.
Canceling the Delayed Start function
If you want to cancel the delayed start
countdown and start the programme
immediately:
1. Set the Delayed Start period to
zero (all delayed start period lights
will turn off) or turn the Programme
Selection knob to any programme.
Thus, Delayed Start function will
be canceled. The End/Cancel light
flashes continuously.
2. Then, select the programme you want
to run again.
3. Press Start / Pause button to start the
programme.

Starting the programme

1. Press Start / Pause button to start the
programme.
2. Programme follow-up light showing
the startup of the programme will turn
on.
61
EN