Honeywell T7270B1009 Installation And Operating Instructions Manual page 2

T7270B1009 WIRELESS WALL MODULE
Fig. 1. T7270B1009
APPLICATION
The T7270B1009 is designed for use in wireless systems,
and is suitable for use in conjunction with the W7070A ZAPP
Wireless Receiver.
FEATURES
•
Easy mounting, no wiring;
•
All functions combined in a single, easy-to-use wall
module;
•
Up to eight separate T7270B1009 wall modules can
simultaneously communicate with the W7070A over
distances of approx. 30 meters and through two walls;
•
Permits not only HVAC, but also light and sunblind
control;
•
Fits seamlessly into XL10 / XL12 individual room control
systems.
•
Radio frequency registration: A, B, CH, D, DK, E, F, FIN,
IT, LUX, N, NL, UK
EN1B-0241GE51 R0106C
OVERVIEW
Functions
In the operating mode, the wall module features the following
six basic functions:
LIGHT,
SUNBLINDS,
OCCUPANCY,
FAN,
SETPOINT OFFSET and
TEMPERATURE DISPLAY/TRANSMIT function.
NOTE: The LIGHT function is the default function (see also
section "Default Function" on page 5 and Fig. 2).
Controls
The wall module features three control buttons and a large
setpoint wheel. They are used (in the operating mode) to
select individual functions and to adjust their respective
settings:
•
the "function" button ("F"),
•
the UP button (" "),
•
the DOWN button (" "), and
•
the setpoint wheel (for adjusting e.g. the value of the
temperature setpoint offset, etc.).
LCD Symbols and Printed Symbols
light
function
symbol
indication bar
fan
symbol
MANU
fan
mode
room
temperature
Fig. 2. Default Display
The function in effect at any particular moment is indicated by
the presence in the LCD of
•
the function indication bar (see Fig. 2), and
•
a corresponding symbol; e.g. the fan symbol
2
sunblind
symbol
thermometer
F
occupancy
symbol
unit
symbol