Removing Thecenterrafl Andcr Motor - Epson GT-9000 Service Manual

3.2.7 Removing the Center Rail and CR Motor
1. Remove the document cover and the uppercase. (Refer to Section 3.2.2.)
Remove the carriage assembly. (Refer to Section 3.2.3.)
2.
Remove the bottom plate. (Refer to Section 3.2.4.)
3.
Disconnect comectors CN6 on the B027 MAIN board.
4.
5. Remove 3 CBB-tite (M4 x 12) screws and 3 CBS-tite (M3 x 6) saews.
Remove the center rail.
6.
7. Remove 3 CBS-tite (M4 x 6) saews.
Remove the motor frame.
8.
Rev. A
Figure 3-9. Removing the Center Rail
Figure 3-10. Removing the Motor Frame
Disassembly and Assembly
3-11