Stop Error Codes; Table 9-1 Stop Error Codes - Hitachi HF-W100E Instruction Manual

9. TROUBLESHOOTING

9.3 STOP Error Codes

A STOP error code provides a summary of an error cause. STOP error codes are displayed on
a blue screen as well as embedded in a memory dump file.
Table 9-1 shows the error cause corresponding to the message which is displayed in the blue
screen.
If the OS is Windows® 10, if there is a Distinguished Name corresponding to a STOP error
code, the Distinguished Name is displayed.
STOP error code
No.
(or Distinguished Name)
1 0x00009222
2 Other than the above

Table 9-1 STOP Error Codes

Error Cause
Watchdog timer
timeout occurrence
STOP error code
for Windows®
9-14
Action
Contact the system administrator or
maintenance personnel.
For information about a Windows®
STOP error, refer to the Microsoft
Knowledge Base.
When you request an analysis of the
memory dump (a service provided for a
fee), after restarting the equipment, save
the log (see "8.3 Maintenance Operation
Commands"), contact our sales
representatives.