Hitachi HF-W100E Instruction Manual page 169

7. RESTORING THE FACTORY-SHIPPED CONDITION USING A RECOVERY DVD
5. When you select Entire drive on the selection window for the drive restore option, the
confirmation window for the settings of the drive restoration is displayed.
・If you are OK with the displayed partition size to be restored, click Yes.
・If you are not OK with the displayed partition size to be restored, click No.
The selection window for the drive restore option returns.
6. When you click Yes in the confirmation window for the settings of the drive restoration,
a restoration process for the drive starts. The progress is displayed in the [Status] box.
The following picture is a example that the number of recovery DVDs is two.
7-7