Related Manuals for Underground Magnetics Mag 3
Summary of Contents for Underground Magnetics Mag 3
- Page 2 Thank you for purchasing your Mag System This Quick Start Guide will walk you through the process of starting your new system and preparing to drill. Please read this over and if you have any questions contact our customer service at 515-505-0960 or email us at support@undergroundmagnetics.com.
- Page 3 Receiver: Mag 6S Display: Mag D6 Transmitter: Echo 1 Echo 2S Echo 3 Echo ST-DX Receiver: Mag 8S Display: Mag D8 Transmitter: Echo 50 Echo 90 Echo 110 Echo ST-DX Page 2...
- Page 4 When you receive your Mag system: The receiver and transmitter will be paired and ready to drill. The transmitter has been unlocked, preprogramed at 19 kHz, and calibrated with the receiver at the factory. Manual 8S | 13 Always check calibration Manual 3&6S | 14 before drilling.
- Page 5 2. Walk the bore path with the receiver while using depth forecast to check for Manual 8S | 16 interference. Manual 3&6S | 16 Use this information to choose which frequency to use. 10 frequency bands: 4kHz, 7kHz, 10kHz, 12kHz, 16kHz, 19kHz, 22kHz, 25kHz28kHz, and 31kHz Select desired frequency and power level in Transmitter Settings...
- Page 6 4. Turn on display by holding the power button down until the Mag logo is Manual 8S | 29 visible on the screen. The Manual 3&6S | 29 screen will display the information being sent from the receiver. Note: Flashing temperature indicates transmitter is overheating 5.
- Page 7 Manual Check out our training videos under the ‘Resources’ tab on our website at www.undergroundmagnetics.com or on our YouTube channel, ‘Underground Magnetics Inc’ Contact your dealer for additional training and support or contact our customer service at 515-505- 0960 Page 6...