Care Of Blades; Accessories And Attachments - Bosch CCS180 Operating/Safety Instructions Manual

2610052972.qxp_CCS180 8/6/19 12:50 PM Page 16
▶ Bearings
Bearings which become noisy (due to
heavy load or very abrasive material
cutting) should be replaced at once to
avoid overheating and motor failure.
▶ Cleaning
damage plastic parts. Some of these
are: gasoline, car bon tetrachloride,
chlorinated cleaning solvents, ammonia
and household detergents that contain
ammonia.
Ventilation openings and switch levers
must be kept clean and free of foreign
matter. Do not attempt to clean by
inserting pointed objects through
opening.
Periodically remove the blade, clean
the upper, lower guards and the hub
Store accessories in a dry and temperate environment to avoid corrosion and
deterioration.
Bosch No.
2610953099
Maintenance
Certain cleaning
agents and solvents

Accessories and Attachments

The use of any other attachments or acces so ries not specified in
this manual may create a hazard.
Description
Accessories
6-1/2" thin kerf 18 tooth carbide blade
6-1/2" thin kerf 24 tooth carbide blade
Attachments
Rip fence
Dust port adapter
area with kerosene and wipe it dry.
Preventive maintenance and properly
operating guard will reduce the
probability of an accident.

▶ Care of Blades

Blades become dull even from cutting
regular lumber. If you find yourself
forcing the saw forward to cut instead
of just guiding it through the cut,
chances are the blade is dull or coated
with wood pitch.
When cleaning gum and wood pitch
from blade, remove the battery from the
saw and remove the blade. Remember,
blades are designed to cut, so handle
carefully. Wipe the blade with kerosene
or similar solvent to remove the gum
and pitch. Unless you are experienced in
sharpening blades, we recommend you
do not try.
Included
-16-
Sold
Separately
– ●
– ●
– ●
– ●